Repair Guide And Solution For Canon Printer Issue

Blank page printing is a problem with canon printers. Canon printers can use either 2 or 4+ cartridges. This happens when the cartridge is empty or if there is a blockage in the vacuum.

To resolve the problem of your printer printing blank sheets, you can follow these steps.

  • Open My Computer from your desktop screen.
  • Right-click on the name of your printer and select properties.
  • Check the printer’s properties and click on Preferences.
  • Click on the preferences option and select services.
  • This option may need to be used several times before it is completely removed from the printer.

Here are some other reasons your Canon printer may not print blank pages:

Breather tape: It prevents ink from prevailing out of the cartridge vacuum, which stops the ink from coming out onto paper.

Replace the cartridge before it runs dry: If you notice that your printer is showing warning signs about low cartridge levels, replace it immediately with a new one. You should ignore the warning signs about low ink levels on your printer. This will cause it to introduce air into the print head, causing a blockage. canon printer printing blank pages The printer will stop printing blank pages if there is air in the nozzle. Although the process may not stop completely, you might still get lines through the printing. This is because of a few blocked nozzles.

Using Third-Party Generic Ink Cartridges: If you don’t use the right ink or you choose to use low-quality third-party generic ink cartridges, your chances of blocking the print nozzle increase. If the ink used is not comparable to Canon inks, there are multiple risks of malfunction. This is because printer ink must be run at the correct rate, and it also has to not condense too quickly.

How to Prevent this Issue

These are some guidelines that you should keep in mind when dealing with this issue.

1. Print frequently

This allows ink to flow continuously through the printhead. This will prevent ink from sitting in the printer’s nozzle and causing blockages.

2. Only use high-quality generic cartridges

Use a high-quality generic cartridge.

3. Place the printer in a cool place.

Because ink can coagulate inside printers, it is best to keep them away from direct sunlight. You can move the printer from near windows to prevent any obstacles from happening.

This article was written to help users solve the problem of Canon printers printing blank pages using the correct procedure.

Canon Printer Printing Blank Pages: Top Reasons

These are the top reasons Canon Pixma printers print blank pages.

  • The Canon printer may have a hardware or driver problem.
  • The cartridge may have a problem or it might not be properly installed.
  • Canon printers printing blank pages may be caused by low ink levels or other fundamental issues.
  • Because of the obstruction of vacuum in your printer device.
  • This problem could also be caused by corrupted software.

Steps To Resolve Canon Pixma Printer Printing Blank Pages Issue.

Take the time to note the steps below to resolve the problem of the Canon printer printing blank pages.

Deep Cleaning with Printer Settings

  • From the Windows desktop screen, open the Control Panel and then click the “Devices and Printers” link.
  • After right-clicking the model name of your Canon printer, click “Properties”.
  • Click on “Preferences” and then “Device settings” in the printer properties section.
  • Select the “Printhead option” from the “Preferences” menu. Next, click on the “Services” and Clean Print Head options.
  • You might need to repeat the previous step several times until the print head is clean.
  • Select the “Maintenance tab” to select the “Deep Cleaning” and “Nozzle Check” options.
  • To check if the printer is printing correctly, you can perform a print test.

Install the Printer Driver

This is how to fix the Canon printer problem of not printing blank pages. canon printer prints blank pages Follow these steps to update your printer driver.

  • To begin, click on the Windows Home key + the S key to open the Search box. Next, click on “Device Manager”.
  • After the Device Manager has been opened, click on the “Print Queue” option to expand it
  • Next, right-click on your printer and select the “Update Driver” option. Check if the update has been installed.
  • Select the “Update” option to install it.
  • After it is done, restart the system and run a print test.

Install the Canon Printer Driver:

If the printer continues to print blank pages, follow these steps to reinstall the driver.

  • Open the control panel, then select programs & Features. Search for your printer driver.
  • Right-click on the driver software, and tap on To Uninstall
  • Restart your system, and then download the printer driver from

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button